DRAIN COOLANT FROM SYSTEM – REMOVE BATTERY BOX – ECU AND ALL ASSOCIATED HOSES TO THERMOSTAT – REMOVE AND REPLACE THERMOSTAT – HOUSING AND INSTALL NEW TEMP SENSOR – INSTALL ALL PARTS NEEDED AND VAC & FILL COOLANT SYSTEM – RUN 2 HEAT CYCLES – PUT IN SERVICE
Dan H. gave our service a 5 star review on 5/19/2023
Due to CANBUS codes advise going over harness for shorts – going over harness found out that the engine block had a short to volt causing a 12v charge on the engine block – therefore sending a "false " code. Found that starter was not functioning.
Steve B. gave our service a 5 star review on 12/30/2022